Module giao tiếp SIMATIC S7 300, có 2 module và cáp đi kèm theo sản phẩm.

Overview

•For connecting mounting racks in multi-tier SIMATIC S7-300 configurations
•IM 365: For design of central controller and max. 1 expansion unit.
Limited use of modules in the expansion unit (e.g. no CPs or FMs)
•IM 360/IM 361: For design of central controller and max. 3 expansion units.
No limitation in selection of modules in the expansion unit

~~~~General features

All interfaces have the following common features:
•Compact configuration:
The rugged plastics housing contains the interfaces for the connecting cables.
•Simple mounting:
The interface modules are mounted on the DIN rail (slot 3) and connected to the I/O modules via a bus connector just like any other module.
•Problem-free configuration:
The interface modules are self-configuring. Address assignment is not required.
•Status and fault LEDs

IM 365

The IM 365 is the low-cost expansion for an ER. It contains the following features:
•One of the two IM 365 modules is inserted in the CC, the other into the ER. The modules are connected by a fixed cable 1 m in length.
•Limited use of modules:
The ER is not connected to the C bus (communication bus). Therefore, no C bus nodes (e.g., CPs and FMs, see configuring aids) may be inserted into the ER.
•No separate power supply:
The modules in the ER are powered by the CPU power supply.