AJ65SBTB1-32D | Mô đun CC-Link 32 Ngõ vào | 24VDC Sink/Source

Chi tiết

AJ65SBTB1-32D | Mô đun CC-Link 32 Ngõ vào | 24VDC Sink/Source

:AJ65SBTB1-32D | CC-Link 32 inputs

Giá:Liên hệ

AJ65SBTB1-32D | Mô đun CC-Link 32 Ngõ vào  | 24VDC Sink/Source


Tình trạng: Sẵn hàng trong kho A.S.C Hồ Chí Minh

Giao hàng: Miễn phí

Bảo hành: 12 tháng chính hãng

Hình ảnh là hình ảnh thực tế thiết bị

Giá chưa bao gồm chiết khấu cho Cửa hàng, Đại lý và VAT 10%

AJ65SBTB1-32D 24VDC 32 ngõ vào đấu dạng Sink/ Source:

  • Number of input points 32 points
  • Isolation method Photocoupler
  • Rated input voltage 24VDC
  • Rated input current Approx. 7mA
  • Operating voltage range 19.2 to 26.4VDC (ripple ratio: within 5%)
  • Max. number of simultaneous input points: 100%
  • ON voltage/ON current 14VDC or higher/3.5mA or higher
  • OFF voltage/OFF current 6VDC or lower/1.7mA or lower
  • Input resistance Approx. 3.3k
  • Response time 
    • OFFON 1.5ms or less (at 24VDC)
    • ONOFF 1.5ms or less (at 24VDC)
  • Wiring method for common 32 points/common (2 points) (1-wire, terminal block type)
  • Input type Positive/negative common shared type (sink/source shared type)
  • Number of occupied stations 32-point assignment/station (32 points used)
  • Module power supply Voltage
    • 20.4 to 26.4VDC (ripple ratio: within 5%)
    • Current 45mA or lower (at 24VDC and all points ON)
  • Noise immunity Noise voltage 500Vp-p, noise width 1µs, noise frequency 25 to 60Hz (DC type noise simulator condition)
  • Withstand voltage 500VAC for 1 minute between all DC external terminals and ground
  • Insulation resistance 10M or higher between all DC external terminals and ground (500VDC insulation resistance tester)
  • Protection degree IP2X
  • Weight 0.25kg
  • I/O part: 34-point direct-mount terminal block [I/O power supply, I/O signal]
  • M3×5.2 screw(tightening torque range: 0.59 to 0.88N•m)
  • Applicable solderless terminal: 2 or less
  • Module mounting screw M4 screw with plain washer finished round (tightening torque range: 0.78 to 1.08N•m)
  • Mountable with a DIN rail in 6 orientations
  • Applicable DIN rail TH35-7.5Fe, TH35-7.5Al (compliant with IEC 60715)
  • Applicable solderless terminal  RAV1.25-3 (compliant with JIS C 2805)
  • [Applicable wire size: 0.3 to 1.25mm2 (22 to 16 AWG) stranded wire]
  •  V2-MS3, RAP2-3SL, TGV2-3N
  • [Applicable wire size: 1.25 to 2.0mm2 (16 to 14 AWG) stranded wire]
  • Wire Material Copper
  • Temperature rating 75°C or more
  • Accessory User’s manual