top
AJ65SBTB2N-16R | Mô đun CC-Link 16 Ngõ ra Relay | Mitsubishi
a

Chi tiết

AJ65SBTB2N-16R | Mô đun CC-Link 16 Ngõ ra Relay

:AJ65SBTB2N-16R

Giá:Liên hệ

AJ65SBTB2N-16R | Mô đun CC-Link 16 Ngõ ra Relay

Xuất xứ: MITSUBISHI JAPAN

Tình trạng: Sẵn hàng trong kho A.S.C Hồ Chí Minh

Giao hàng: Miễn phí

Bảo hành: 12 tháng chính hãng

Hình ảnh là hình ảnh thực tế thiết bị

Giá chưa bao gồm chiết khấu cho Cửa hàng, Đại lý và VAT 10%

Thông số kỹ thuật AJ65SBTB2N-16R

  • Số ngõ ra: 16
  • Dạng ngõ ra: Relay
  • Rated load voltage/current: 2A/point, 8A/common at 24VDC (resistive load) or 240VAC (cos=1)
    • Min. switching load 5VDC, 1mA
    • Max. switching voltage 264VAC, 125VDC
  • Thời gian phản hồi: OFFON 10ms or less, ONOFF 12ms or less
  • Độ bền: Mechanical 20 million times or more
  • Electrical:
    • Rated switching voltage/current load: 100 thousand times or more
    • 200VAC 1.5A, 240VAC 1A (cos=0.7): 100 thousand times or more
    • 200VAC 1A, 240VAC 0.5A (cos=0.35): 100 thousand times or more
    • 24VDC 1A, 100VDC 0.1A (L/R=7ms): 100 thousand times or more
    • Max. switching frequency 3600 times/hour
  • Wiring method for common 16 points/common (2-wire, terminal block type)
  • Number of occupied stations 32-point assignment/station (16 points used)
  • Module power supply
  • Voltage 20.4 to 26.4VDC (ripple ratio: within 5%)
  • Current 120mA or lower (at 24VDC and all points ON)
  • Noise immunity
  • Noise voltage: 1500Vp-p (AC type), 500Vp-p (DC type), noise width 1µs,
  • noise frequency 25 to 60Hz (noise simulator condition)
  • Fast transient/burst immunity test
  • IEC 61000-4-4:1kV
  • Withstand voltage
  • 2830VACrms for 3 cycles between all AC external terminals and ground (2000m
  • above sea level)
  • 500VAC for 1 minute between all DC external terminals and ground
  • Insulation resistance
  • 10M or higher between all AC external terminals and ground (500VDC insulation
  • resistance tester)
  • 10M or higher between all DC external terminals and ground (500VDC insulation
  • resistance tester)
  • Weight 0.35kg
  • External
  • connection
  • system
  • Communication part,
  • module power supply part
    • 7-point two-piece terminal block
    • [Transmission circuit, module power supply, FG]
  • M3×5.2 screw (tightening torque range: 0.59 to 0.88N•m)
  • Applicable solderless terminal: 2 or less
  • I/O power supply part,
  • I/O part
  • 34-point direct-mount terminal block
  • [I/O power supply, I/O signal]
  • M3×5.2 screw (tightening torque range: 0.59 to 0.88N•m)
  • Applicable solderless terminal: 2 or less
  • Module mounting screw
  • M4 screw with plain washer finished round
  • (tightening torque range: 0.78 to 1.08N•m)
  • Mountable with a DIN rail in 6 orientations
  • Applicable DIN rail TH35-7.5Fe, TH35-7.5Al (compliant with IEC 60715)
  • Applicable solderless terminal
  •  RAV1.25-3 (compliant with JIS C 2805)
  • [Applicable wire size: 0.3 to 1.25mm2 (22 to 16 AWG) stranded wire]
  •  V2-MS3, RAP2-3SL, TGV2-3N
  • [Applicable wire size: 1.25 to 2.0mm2 (16 to 14 AWG) stranded wire]
  • Wire Material Copper
  • Temperature rating 75°C or more
  • Accessory User’s manual