top
Bán Siemens SIMATIC S7 300 CPU317T-2DP, 6ES7 317-6TK13-0AB0
a

Chi tiết

SIMATIC S7 300 CPU317T 2DP, 6ES7 317 6TK13 0AB0

:6ES7 317-6TK13-0AB0

Giá:Liên hệ

Siemens CPU317T-2DP, 6ES7 317-6TK13-0AB0

Xuất xứ: Siemens Đức

Tình trạng: Sẵn hàng trong kho A.S.C Hồ Chí Minh

Giao hàng: Miễn phí

Bảo hành: 12 tháng chính hãng

Giá chưa bao gồm chiết khấu cho Cửa hàng, Đại lý và VAT 10%

BỘ LẬP TRÌNH CÔNG NGHỆ SIMATIC S7-300, CPU 317T-2 DP, BỘ NHỚ CHƯƠNG TRÌNH 1024 KBYTE

1. TÍCH HỢP SẴN 1 CỔNG MPI/DP 12MBIT/S

2. INTERFACE DP(DRIVE), INTEGRATED I/O FOR TECHNOLOGY FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD MIN. 8 MB NECESSARY

BỘ LẬP TRÌNH SIEMENS CPU317T-2DP 6ES7 317-6TK13-0AB0 CHUYÊN DỤNG TÍCH HỢP CÁC HÀM MACHINE CONTROL (MC), SỬ DỤNG CHO NHỮNG ỨNG DỤNG ĐIỀU KHIỂN VỊ TRÍ NHIỀU TRỤC CÓ ENCODER HOẶC SERVO. PHẢN HỒI VỊ TRÍ VÀ NỘI SUY TUYẾN TÍNH. YÊU CẦU THẺ NHỚ TỐI THIỂU 8MB.

 

  • Thông số chi tiết:

  • SIMATIC CPU with integral Technology/Motion Control functionality
  • With full standard CPU 317-2 PN/DP functionality (except for CBA)
  • For cross-industry automation tasks in series machine, special machine and plant construction
  • Ideal for synchronized motion, such as coupling to a virtual/real master, gear synchronization, cam disk, path interpolation, or print mark compensation
  • 3D path interpolation with different kinematics
  • Position and pressure-regulated hydraulic axes
  • Used as central controller in production lines with central and distributed I/O
  • With integrated I/O for high-speed technology functions (e.g. camming, reference point acquisition)
  • PROFIBUS DP (DRIVE) interface for isochronous connection of drive components
  • PROFINET interface with 2-port switch
  • PROFINET I/O controller for operating distributed I/O on PROFINET
  • One common S7 user program for control and motion control tasks (no additional programming language necessary for motion control)
  • "S7 Technology" option package required (version V4.2 SP3 and higher)

 

SIMATIC Micro Memory Card (8 MB) required for operation of the CPU.

Function

The CPU 317T-3 PN/DP has the full functionality of the CPU 317-2 PN/DP (except for CBA). In addition, high-performance motion control functions are available.

The programming is carried out with STEP 7 as well as the option package S7-Technology. 
The following kinematics are supported:

  • Cartesian (two and three-dimensional)
  • Roll picker
  • Scara
  • Articulated arm
  • Delta2D picker
  • Delta3D picker

The following motion control functions can be used with the CPU 317T-3 PN/DP:

  • Basic functions
    • MC_ReadSysParameter
    • MC_Reset
    • MC_WriteParameter
  • Single-axis functions
    • MC_ChangeDataset
    • MC_Halt
    • MC_Home
    • MC_MoveAbsolute
    • MC_MoveAdditive
    • MC_MoveRelative
    • MC_MoveSuperImposed
    • MC_MoveToEndPos
    • MC_MoveVelocity
    • MC_Power
    • MC_SetTorqueLimit
    • MC_Stop
  • Synchronous operation functions
    • MC_CamIn
    • MC_CamOut
    • MC_GearIn
    • MC_GearOut
    • MC_Phasing
  • Superimposed synchronous operation functions
    • MC_CamInSuperImposed
    • MC_CamOutSuperImposed
    • MC_GearInSuperImposed
    • MC_GearOutSuperImposed
    • MC_PhasingSuperImposed
  • Cam functions
    • MC_CamClear
    • MC_CamInterpolate
    • MC_CamSectorAdd
    • MC_GetCamPoint
  • Other functions
    • MC_CamSwitch
    • MC_CamSwitchTime
    • MC_ExternalEncoder
    • MC_MeasuringInput
    • MC_ReadPeriphery
    • MC_ReadRecord
    • MC_WritePeriphery
    • MC_WriteRecord
  • Drive functions
    • MC_DriveDiagnostics
    • MC_ReadDriveParameter
    • MC_WriteDriveParameter
  • Pressure/Force commands
    • MC_ForceLimiting
    • MC_ForceControl
  • Path commands
    • MC_SetCartesianTransform
    • MC_GroupStop
    • MC_GroupInterrupt
    • MC_GroupContinue
    • MC_MoveLinearAbsolute
    • MC_MoveLinearRelative
    • MC_MoveCircularAbsolute
    • MC_MoveCircularRelative
    • MC_MovePath
    • MC_PathSelect
    • MC_MovePolynomialAbsolute
    • MC_MovePolynomialRelative
    • MC_ZoneCheck
    • MC_GroupSyncConveyorBelt
    • MC_RedefineTrackingPos
    • MC_MoveCircles

Application

The CPU 317T-3 PN/DP is used primarily in machines where a control with a large program memory coincides with high processing speed and motion control requirements, e.g.:

  • Processing/assembly lines
  • Carton erectors
  • Palletizers
  • Handling systems
  • Flying shears
  • Bottling plants
  • Wrapping
  • Labeling machines
  • Roll feeds
  • Portals with interpolation

The typical application for motion control functions is for 3-8 axes. The maximum number of axes is 32. Along with accurate single axis positioning, the module is suitable primarily for complex motion sequences such as coupling to form a virtual or actual master, gearing, cam, path interpolation or print mark correction.

The quantitative framework of the CPU 317T-3 PN/DP makes it ideal for the use of SIMATIC Engineering Tools, e.g.:

  • Programming with SCL
  • Machining step programming with S7-GRAPH